Boat Ports

JetPort 2" Pipe Holder Mount Kit Used with JetPort Kayak Dock, LS port, XL Port, and XL Boat Port.  We recommend using our High Water Poles,  Z-Bracket Kit or Adjustable Z Bracket for dock mounting.  Includes: 2x - 3" Pipe holder 2x -...

JetPort 4" Pipe Holder Mount Kit Used with JetPort Kayak Dock, LS port, XL Port, and XL Boat Port. Typically used to mount the port from the sides. Includes: 2x - 4" Pipe holder 2x - structure plugs, 2x - bolt and block kits. We recommend using our...

The JetPort XL Port can be used for PWC's and boats under 14 feet in length and are under 8 feet in width. This one-piece unit makes the XL a breeze to install. With the ease of installation and time saved putting your watercraft in and out of the water,...

PVC Caps for 3" or 4" PVC Poles   Set of 2

4" PVC Pole with 2" Inner Galvanized Pole Kit This kit is used with floating drive-on ports to secure them to a seawall, fixed dock, floating dock or in freestanding mode. Kit Includes: 1x - 4" schedule 40 PVC Poles 1x - 2" Inner Galvanized Pole 1x - 4"...

4" PVC Pole with 2" Inner Galvanized Pole Kit This kit is used with floating drive-on ports to secure them to a seawall, fixed dock, floating dock or in freestanding mode. Enough for 1 floating drive-on dock or 2 joined. Kit Includes: 2x - 4" schedule...

Round Piling Flat Pole Bracket Mounting Kit (Set of 2) Attach one side to a piling and use the other side to attach the pole supporting your port. Contains 2 Round Piling Bracket Plates and 2 Flat Pole Bracket Plates with 4 U-Bolts, 8 lag bolts, 8 nuts,...

Flat Pole Bracket Mounting Kit (Set of 2) Attach one side to a flat surface and use the other side to attach the pole supporting your port. Contains 4 Flat Pole Bracket Plates with 4 U-Bolts, 8 lag bolts, 8 nuts, 4 bolts, 4 lock nuts and 20 washers. Can...

6" black nylon cleat that fits a JetPort XL Port Front Extension. Comes with two (2) mounting screws. Mounts directly to the Jetport XL or XL Boat Port Front Extension with supplied mounting screws. 

JetPort LS PWC to JetPort XL Port Joiner Kit   Kit Includes one front single link joiner and back link adapter. 

The Tall Dock Mount Bracket allows for a close pole mount high above a fixed dock face. This mounting type is used typically where the water level will exceed the mounting location available or where the water level will raise above a dock height.

Rough Water Structure Plug Kit for JetPort Products Used with various attachments to lock attachments to the float. Has a Galvanized Block, 1/2" nut, and a reinforced plate.