__26481.original.png "JetPort Roll and Ride")
JetPort Roll and Ride
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
JetPort Roll and Ride PWC Port
$1,750.00The Florida Docks Roll and Ride Drive-On PWC Port is for lightweight PWC's under 1400lbs! Jet Ski's 11 feet and under in length. The 64" wide port provides room to walk around the port. This PWC dock has 8 inline rollers for easy launching. This...- SKU:
- CDRR
- Weight:
- 215.00 LBS
- Features:
- The JetPort Roll and Ride, similar to the LS, accommodates PWCs under 1400lbs and less than 11ft long. This port is 64" wide, allowing a small amount of walking room around the PWC.
$1,750.00 -
Z Bracket Kit, Stainless Steel, includes 2 Z Brackets
$250.00Z Bracket Kit - Stainless Steel with Stainless Steel Hardware Contains 2 mounting brackets and 4 U-Bolt Kits Mounts directly to a dock or sea wall. Designed to hold a 4 in Schedule 40 pipe. To use with a concrete sea wall purchase our Concrete Anchor...- SKU:
- KITCDZBRCKT-SS
- Weight:
- 20.00 LBS
- Features:
- The Z Bracket Kit - Stainless Steel - is mounted directly to docks or seawalls and used with 4" poles to support your port, with 10in of space.
$250.00 -
Z Bracket, Stainless Steel, Single
$125.00Z Bracket - Stainless Steel with Hardware Contains 1 mounting brackets and 2 U-Bolt Kits Mounts directly to a dock or sea wall. Designed to hold a 4 in Schedule 40 pipe. To use with a concrete sea wall purchase our Concrete Anchor Kit Can be used...- SKU:
- FDZBRCKT-SS-Single
- Weight:
- 8.00 LBS
- Features:
- The Z Bracket is mounted directly to docks or seawalls and used with a 4" pole to support your port, with 10in of space.
$125.00Qty in Cart: 0Quantity:Price:$125.00Subtotal:$0.00 -
Adjustable Z Bracket Kit, Single
$125.00Adjustable Z Bracket Kit with Stainless Steel Hardware Adjusts from 12 to 16" of space between the mounting location and the port. Designed to hold a 2, 3, or 4 inch Schedule 40 PVC pipe. Contains: 1 Adjustable Z BRACKET for 2, 3, or 4" Pole Mounts...- SKU:
- KITFDZBRKT-ADJ
- Weight:
- 14.00 LBS
- Features:
- The Florida Docks’ Adjustable Z Bracket is used to add 12in – 16in of space between the mounting surface and the port. Compatible with 2in, 3in, or 4in poles to fit multiple different ports.
$125.00 -
Double 4in PVC Pole with 2in Inner Pole Kit
$325.00 - $608.004" PVC Pole with 2" Inner Galvanized Pole Kit This kit is used with floating drive-on ports to secure them to a seawall, fixed dock, floating dock or in freestanding mode. Enough for 1 floating drive-on dock or 2 joined. Kit Includes: 2x - 4" Schedule...- SKU:
- KIT4PVCw2GALV
- Weight:
- 50.00 LBS
- Features:
- Kit Includes: Two (2) 4" Schedule 40 PVC Poles, 10.5ft or 21ft length. Two (2) 2" Inner Galvanized Poles, 10.5ft or 21ft length. Two (2) 4" PVC Caps.
$325.00 - $608.00 -
Flat Bracket Mounting Kit (Set of 2)
$295.00Flat Bracket Mounting Kit (Set of 2) Attach one side to a flat surface and use the other side to attach the pole supporting your port. Contains 4 Flat Pole Bracket Plates with 4 U-Bolts, 8 lag bolts, 8 nuts, 4 bolts, 4 lock nuts and 20 washers. Designed...- SKU:
- KITFDFLAT
- Weight:
- 25.00 LBS
- Features:
- The Flat Pole Bracket allows you to mount your port to any flat surface. Can be used with 2-4" poles. Add an adjustable stiff arm to mount farther away from the surface.
$295.00 -
Tall Dock Mount Bracket
$325.00The Tall Dock Mount Bracket allows for a close pole mount high above a fixed dock face. This mounting type is used typically where the water level will exceed the mounting location available or where the water level will raise above a dock height.- SKU:
- FD-HIDRY-BRKT
- Weight:
- 20.00 LBS
$325.00 -
Adjustable Z Bracket Kit, set of 2
$250.00Adjustable Z Bracket Kit with Stainless Steel Hardware Adjusts from 12 to 16" of space between the mounting location and the port. Designed to hold a 2, 3, or 4 inch Schedule 40 PVC pipe. Contains: 2 Adjustable Z BRACKETs for 2, 3, or 4" Pole...- SKU:
- KITFDZBRKT-ADJ2
- Weight:
- 14.00 LBS
- Features:
- The Florida Docks’ Adjustable Z Bracket is used to add 12in – 16in of space between the mounting surface and the port. Compatible with 2in, 3in, or 4in poles to fit multiple different ports.
$250.00 -
Concrete Anchor Kit
$60.00Concrete Anchor Kit 8 ea of 3/8 x 4 in concrete wedge bolts in stainless steel- SKU:
- FDCONCRETEANCHORKIT
- Weight:
- 1.00 LBS
$60.00 -
JetPort 2in Pipe Holder Mount Kit
$199.00JetPort 2" Pipe Holder Mount Kit Used with JetPort Kayak Dock, LS port, XL Port, and XL Boat Port. We recommend using our High Water Poles or Adjustable Z Bracket for dock mounting. Includes: 2x - 3" Pipe holder 2x - structure plugs, 2x -...- SKU:
- CD2INPIPE
- Weight:
- 10.00 LBS
$199.00 -
JetPort 4in Pipe Holder Mount Kit
$199.00JetPort 4" Pipe Holder Mount Kit Used with JetPort Kayak Dock, LS port, XL Port, and XL Boat Port. Typically used to mount the port from the sides. Includes: 2x - 4" Pipe holder 2x - structure plugs, 2x - bolt and block kits. We recommend using our...- SKU:
- CDSIDEMNT
- Weight:
- 10.00 LBS
$199.00 -
FLD High Water Pole, 16in
$200.00Does your water rise to the top of your dock or seawall occasionally? The Florida Docks High Water Poles offer you a secure and attractive solution. Aluminum High Water Poles add additional height for your Port to float up and down when connected to a...- SKU:
- FDHWBP16
- Weight:
- 18.00 LBS
- Features:
- Florida Docks’ custom High Water Poles are perfect for fixed docks or seawalls that experience rising water. The candy cane-shaped poles add 16" height to your mounting surface, allowing your port to stay connected.
$200.00