Snap Port PWC Port

3" PVC Pole with 2" Inner Schedule 40 Galvanized Pole Kit This kit is used with floating drive on ports to secure them to a seawall, fixed dock, floating dock or in freestanding mode. Enough for 1 floating drive on dock or 2 joined. Kit Includes: 2x -...

Snap Dock Coupler Long Bolt - 14" Used to connect the Snap Dock Platforms and join Snap Ports. It is a neccessary part to assemble the Coupler Connector Set.   Includes: 1 - 14" Long Bolt   *Not used to connect the Snap Port Front and...

Flat Bracket Mounting Kit (Set of 2) Attach one side to a flat surface and use the other side to attach the pole supporting your port. Contains 4 Flat Pole Bracket Plates with 4 U-Bolts, 8 lag bolts, 8 nuts, 4 bolts, 4 lock nuts and 20 washers. Designed...

8" Straight Cleat for Snap Dock products with 2 Bolts. Fits SnapDock and Snap Ports exactly. Hardware for Snap Dock provided. Can be used additionally with wood or composite docks, but will require different screws, not provided.

Snap Dock 36" High Water Pole Kit - 2" Pipe Bracket Brushed aluminum High Water Poles add additional height for your Port to float up and down when connected to a fixed dock or seawall, in the even that your water rises highter than your fixed attachment...

Snap Dock 16" High Water Pole Kit - 2" Pipe Bracket Brushed aluminum High Water Poles add additional height for your Port to float up and down when connected to a fixed dock or seawall, in the even that your water rises highter than your fixed attachment...

The Stainless Steel In Water Installation Tool  Used to properly seat Snap Dock’s Coupler Set dock section pocket. Material: Stainless Steel Includes: (1) In Water Installation Tool   48"x15"x1"

Standard Duty Galvanized Deadweight Bracket  To Anchor Snap Dock product simply slide the “J ” hook into the top pocket and use a half coupler to secure into the bottom pocket. Requires 1 Male Half Coupler

The Heavy Duty Galvanized Deadweight & Pipe Bracket provides additional support with a second pocket strengthening larger floating dock systems or small systems in rougher water.    Requires 4 Male Half Couplers

Snap Dock Piling Bracket Includes: 1 Piling Bracket 1 Replaceable Wear Ring 2 Coupler Sets 4 Pocket Fillers

The Heavy Duty 3" Pipe Bracket is a two pocket installation instead of one pocket anchoring system design to accommodate intense wave action and rough water. Maximum Pipe Outside Diameter 3.5" (3" Nominal) Includes: 1 Heavy Duty 3" Pipe Bracket 2 Coupler...

The Standard 3" Pipe Bracket is a polyethylene product designed to attach to Snap Dock’s floating docks & port utilizing our patent pending coupler system. The pipe bracket offers vertical movement with minimum horizontal movement in water...